Explanation

Defines whether a port is emulating. When on, the port emulates and generates impairments for all enabled flows. The flows are configured using the PF_xxx parameters. While emulation is on the flows for this port cannot be enabled or disabled, and the configuration of those flows that are enabled cannot be changed.

Summary

set and get, value type: B

Parameters

onoff: coded byte, whether traffic generation is active for this port

·        OFF (0)

·        ON (1)

Example, set or get:

0/0 P_EMULATE ON

Explanation

Whether a port should enable its transmitter, or keep the outgoing link down.

Summary

set and get, value type: B

Parameters

onoff: coded byte, whether the transmitter is enabled.

·        OFF (0)

·        ON (1)

Example, set or get:

0/0 P_TXENABLE ON

Explanation

Get status readings for the port itself.

Summary

get only, value types: I, B, I

Parameters

opticalpower: integer, received signal level for optical ports, in nanowatts, -1 when not available.

emulate_status: Coded byte: Informs if emulation has been activated

·        OFF (0)

·        ON (1)

time_elapsed: integer, time in milliseconds indicating for how long time an ongoing emulation has been activated

Example, get:

0/0 P_STATUS -1 OFF 0