OpenAutomation Knowledge Base

Check Thor AN-LT Status

1. Enable AN-LT in both DUT and THOR. Select the THOR port -> Resource Properties -> PCS/PMA Config & Status -> Enable Autoneg

2. Select the chassis which you are using, then click the “Open ScriptClient” to run the script client.

3. Input the commands to check AN/LT status

4. Commands:

Link Training Status:  module/port PP_LINKTRAINSTATUS [line id] ?

For example: 9/0 PP_LINKTRAINSTATUS [0] ?

Return Result: 9/0  PP_LINKTRAINSTATUS  [0]  ENABLED TRAINED NO_FAILURE

Auto-negotiation Status: module/port PP_AUTONEGSTATUS ?

For example: 9/0 PP_AUTONEGSTATUS ?

Return result: 9/0  PP_AUTONEGSTATUS  ANEG_ON RS_FEC AN_GOOD IEEE_200GBASE_CR4_KR4 DEFAULT_FEC RSFEC_CL91 NO_PAUSE

Understanding Ethernet - from basics to testing & optimization

00
Months
00
Days
00
Hours
00
Minutes
00
Seconds
Close the CTA