Freya-800G-4S-1P-OSFP

4-speed 800G (112Gbps SerDes) & OFSP compatible test module

Download Datasheet
software

The Freya-800G-4S-1P-OSFP test module supports four Ethernet network speeds – 800GE, 400GE, 200GE and 100GE using 112G SerDes (PAM4 112G).

The module supports OSFP-compatible transceivers and the following speeds: 1x800GE, 2x400GE, 4x200GE and 8x100GE.

Freya-800G-4S-1P-OSFP is a highly versatile solution for performance and functional testing of network infrastructure and Ethernet equipment including switches, routers, NICs, TAPs, packet-brokers, and backhaul platforms.

Freya-800G-4S-1P-OSFP is unique on the market with its ability to test up to 800GE with 112G SERDES (PAM4 112G) on OSFP optics and DACs and perform Auto-Negotiation and Link Training (AN/LT). Received signals can be analyzed the advanced signal integrity view, which provides visual information on the quality of the signal.

Like a guided tour of our software?

Take a free guided tour of our software. You'll see all the features, plus we'll answer any questions along the way.


Book an online meeting Try our demo

Specifications

PORT LEVEL FEATURES

  1. Interface category

    OSFP: 800G, 400G, 200G, 100G Ethernet

  2. Total number of test ports (software configurable)

    1x800G, 2x400G, 4x200G and 8x100G Ethernet

  3. Interface options

    OSFP cage:

    1 x 800GE or       PAM4          Consortium**
    2 x 400GE or       PAM4          802.3ck
    4 x 200GE or        PAM4         802.3ck
    8 x 100GE              PAM4         802.3ck

    Power capacity: 15W (ValkyrieBay) / 25W (ValkyrieCompact)

    ** As defined by Ethernet Technology Consortium

  4. Auto Negotiation and Link Training

    IEEE 802.3 Clause 73, Consortium 800G specification, Auto-negotiation
    IEEE 802.3 Clause 72, Link training

  5. Forward Error Correction (FEC)

    RS-FEC (Reed Solomon) (544,514,t=15), IEEE 802.3 Clause 119, Clause 134

  6. Number of transceiver module cages

    1 x OSFP

  7. Port statistics

    Link state, FCS errors, pause frames, ARP/PING, error injections, training packet
    All traffic: RX and TX Mbit/s, packets/s, packets, bytes
    Traffic w/o test payload: RX and TX Mbit/s, packets/s, packets, bytes

  8. Adjustable Inter Frame Gap (IFG)

    Configurable from 16 to 56 bytes, default is 20B (12B IFG + 8B preamble)

  9. Transmit line rate adjustment

    Ability to adjust the effective line rate by forcing idle gaps equivalent to -1000 ppm (increments of 10 ppm)

  10. Transmit line clock adjustment

    From -400 to 400 ppm in steps of 1 ppm (shared across all ports)

  11. ARP/PING

    Supported (configurable IP and MAC address per port)

  12. Field upgradeable

    System is fully field upgradeable to product releases (FPGA images and software)

  13. Tx disable

    Enable/disable of optical laser or copper link

  14. IGMPv2 multicast join/leave

    IGMPv2 continuous multicast join, with configurable repeat interval

  15. Histogram statistics

    Two real-time histograms per port. Each histogram can measure one of RX/TX packet length, IFG, or Latency distribution for all traffic, a specific stream, or a filter

  16. Loopback modes

    • L1RX2TX – RX-to-TX, transmit byte-by-byte copy of the incoming packet
    • TXON2RX – TX-to-RX, packet is also transmitted from the port
    • TXOFF2RX – TX-to-RX, port’s transmitter is idle

  17. Oscillator characteristics

    • Initial Accuracy is 3 ppm
    • Frequency drift over 1st year: +/- 3 ppm (over 15 years: +/- 15 ppm)
    • Temperature Stability: +/- 20 ppm (Total Stability is +/- 35 ppm)

PCS/PMA LAYERS TESTING

  1. Payload Test pattern

    PRBS-31Q

  2. Alarms

    PRBS pattern loss, link sync loss

  3. Error analysis

    Bit-errors: seconds, count, rate

  4. PCS virtual lane configuration

    User-defined skew insertion per Tx virtual lane, and user defined virtual lane to SerDes mapping for testing of the Rx PCS virtual lane re-order function

  5. PCS virtual lane statistics

    Relative virtual lane skew measurements (up to 2048 bits)
    Corrected Bit error, PreFEC BER

  6. FEC Total statistics

    Total corrected FEC symbols, Total uncorrected FEC symbols, Estimated Pre-FEC BER, Estimated Post-FEC BER, Pre-FEC Error Distribution Graph

  7. Link Flap

    Single short or repeatable link down events with ms precision

  8. Error Injection (PMA Layer)

    Repeatable error inject periods at PMA layer with ms precision

PHY/TRANSCEIVER ETHERNET TESTING

  1. Programmable Pattern Generator

    Ethernet frames with FCS
    Traffic load: up to 100%
    Configurable Frame Size distribution and content
    Transmit and Receive Statistics

ADVANCED PHY FEATURES

  1. Equalization Controls

    Tx Transmit Equalization Controls

    • Pre-emphasis
    • Attenuation
    • Post-emphasis

    Auto-Tune of Rx equalizer/CTLE

  2. Signal Integrity Analysis

    • FEC error correction chart
    • Advanced signal integrity view

TRANSMIT ENGINES

  1. Number of transmit streams per port

    256 (wire-speed)
    Each stream can generate millions of traffic flows using field modifiers

  2. Test payload insertion per stream

    Wire-speed packet generation with timestamps, sequence numbers, and data integrity signature optionally inserted into each packet.

  3. Stream statistics

    TX Mbit/s, packets/s, packets, bytes, FCS error

  4. Bandwidth profiles

    Burst size and density can be specified. Uniform and bursty bandwidth profile streams can be interleaved

  5. Field modifiers

    16-bit or 32-bit header field modifiers with inc, dec, or random mode. Each modifier has configurable bit- mask, repetition, min, max, and step parameters. Eight 16-bit modifiers per stream or four 32-bit modifiers per stream

  6. Packet length controls

    Fixed, random, butterfly, and incrementing packet length distributions from 56 to 12288 bytes

  7. Packet payloads (basic)

    Repeated user specified 1 to 18B pattern, an 8-bit incrementing pattern

  8. Error generation

    Undersize length (56 bytes min) and oversize length (12288 bytes max.) packet lengths, injection of sequence, misorder, payload integrity, and FCS errors

  9. TX packet header support and RX autodecodes

    Ethernet, Ethernet II, VLAN, ARP, IPv4, IPv6, UDP, TCP, LLC, SNAP, GTP, ICMP, RTP, RTCP, STP, MPLS, PBB, or fully specified by user

  10. Packet scheduling modes

    • Normal (stream interleaved mode) – standard scheduling mode, precise rates, minor variation in packet inter-frame gap.
    • Strict Uniform – new scheduling mode, with 100% uniform packet inter-frame gap, minor deviation from configured rates.
    • Sequential packet scheduling (sequential stream scheduling). Streams are scheduled continuously in sequential order, with configurable number of packets per stream.
    • Burst. Packets in a stream are organized in bursts. Bursts from active streams form a burst group. The user specifies time from start of one burst group till start of next burst group.

RECEIVE ENGINE

  1. Number of traceable Rx streams per port

    2016 (wire-speed)

  2. Automatic detection of test payload for received packets

    Real-time reporting of statistics and latency, loss, payload integrity, sequence error, and misorder error checking

  3. Jitter measurement

    Jitter (Packet Delay Variation) measurements compliant to MEF10 standard with 8ns accuracy
    Jitter can be measured on up to 32 streams

  4. Stream statistics

    • RX Mbit/s, packets/s, packets, bytes.
    • Loss, payload integrity errors, sequence errors, misorder errors
    • Min latency, max latency, average latency
    • Min jitter, max jitter, average jitter

  5. Latency measurements accuracy

    ±32ns

  6. Latency measurement resolution

    8ns (Latency measurements can calibrate and remove latency from transceiver modules)

  7. Number of filters:

    • 6 x 64-bit user-definable match-term patterns with mask, and offset
    • 6 x frame length comparator terms (longer, shorter)
    • 6 x user-defined filters expressed from AND/OR’ing of the match and length terms

  8. Filter statistics

    Per filter: RX Mbit/s, packets/s, packets, bytes

CAPTURE

  1. Capture criteria

    All traffic, stream, FCS errors, filter match, or traffic without test payloads

  2. Capture limit per packet

    16 – 12288 bytes

  3. Wire-speed capture buffer per port

    96 kB for 100GE

  4. Low speed capture buffer per port (10Mbit/s speed)

    4096 packets (any size)

HW SPECIFICATIONS

  1. Max. Power

    TBA

  2. Weight

    2.31 lbs (1.05 kg)

  3. Environmental

    Operating Temperature: 10 to 35º C
    Storage Temperature: -40 to 70º C
    Humidity: 8% to 90% non-condensing

  4. Regulatory

    FCC (US), CE (Europe)

  5. Notes

    This module is only supported by the Val-C12-2400 chassis
    This module requires two slots in the Val-C12-2400 chassis

Includes this free software

software

ValkyrieManager

ValkyrieManager is a Windows-based application for managing every aspect of Xena’s Valkyrie stateless Ethernet traffic generation and analysis test solutions.
software

ValkyrieCLI

ValkyrieCLI is a command-line-interface (CLI) scripting API that makes test automation easy for test engineers using the ValkyrieBay and ValkyrieCompact chassis.
software

ValkyrieTimeSynch

For One-Way Latency (OWL) measurements, synchronized traffic start and accurate timestamping
software

Valkyrie1564

Valkyrie1564 is a free PC application that lets you analyze synchronous Ethernet and perform the Y.1564 methodology using one or more Valkyrie test chassis.
software

Valkyrie2544

Valkyrie2544 is a free PC application that makes it easy to create, edit and execute test configurations in accordance with RFC 2544.
software

Valkyrie2889

Performance Benchmarking L2 LAN switches
Valkyrie2889 makes it easy to accurately benchmark the performance of Layer 2 LAN switches according to RFC 2889.
software

Valkyrie3918

Valkyrie3918 is a free PC application installed together with ValkyrieManager that lets you do advanced IP multicast network testing, by helping you perform RFC3918 testing using one or more Valkyrie test chassis.

Technical Documentation

Relevant Products

...performing the same type of tests

product

Freya-800G-1S-1P-OSFP

4-speed 800G (112Gbps SerDes) & OFSP compatible test module
product

Freya-800G-4S-1P

4-speed 800G (112Gbps SerDes) dual-media test module
product

ValkyrieBay

The flagship chassis of the Valkyrie test platform – 12-slot, high port density in a 4U form factor.

Our products are distributed here

1
2
3
4
5
6
7
8
1

Canada

2

North America

3

South America

4

Europe

5

Africa

6

India

7

Asia

8

Australia

Find your local Xena partner

Our product lines

Link to: Valkyrie

Valkyrie

Valkyrie is a stateless Ethernet traffic generation and analysis platform that supports all types of performance, QoS, conformance and functional testing at all speeds up to 400GE.

See more
Link to: Vulcan

Vulcan

Vulcan generates stateful Ethernet traffic to analyze how devices such as firewalls, NICs, packet brokers, NAT routers, bandwidth shapers perform in a wide range of real-world scenarios.

See more
Link to: Vantage

Vantage

Vantage is a stable and robust Ethernet production line solution with a very simple UI for testing switches, NICs, routers, GPON devices, cable modems, transceivers, cables and so on.

See more
Link to: Safire

Safire

Safire makes it easy to test the performance of enterprise firewalls – with features like antivirus, app-control, IPS and SSL decryption – and document the results in “read-at-a-glance” PDFs.

See more
Link to: Chimera

Chimera

Chimera is a cost-effective solution for emulating different forms of impairment (e.g. latency and jitter, bandwidth control and shaping) between DUTs in the lab – at rates from 10GE to 100GE.

See more

Award Winning Solutions

Xena has won multiple global awards for price/performance and technical innovation. Learn more.

Support

Resources

Corporate

STAY IN TOUCH

Copyright 2009-2021 Xena Networks.

Website Terms & Conditions / Privacy Statement / Business Terms & Conditions