Vantage Knowledge Base

Vantage support BroadR-Reach, you could enable and select a mode for the port as below:

1. Enter the “Test Configuration” page of Vantage.

2. Open the test configuration which you want to configure.

3. Find the “Port Configuration”, then you could select the “Slave” or “Master” mode for the ports.

4. Click the “Set” button to save the configuration.

Ethernet Alliance Virtual Event - “TEF 2021: The Road Ahead” Jan 25-29. 

00
Months
00
Days
00
Hours
00
Minutes
00
Seconds