In Analysis, you can download reports and analyze reports.

Download Reports

Go to Dashboard and click Analysis > Test Reports . You will be directed to Reports page.

Every time you run a test case, the test result is saved and can be downloaded as a single test report. Under a test case you will have the test reports to download. The number of test reports is shown on the left side of the test case. Expand a test case and download the report by clicking the download icon.

Open Reports In Browser

Click on a report under a test case and click OPEN REPORT.

Test Result Analysis

Go to Dashboard and click Analysis > Result Analyzer. You will be directed to Result Analyzer page.

On the Result Analyzer page, you can see five analysis scenarios, as shown below. Each analysis scenario has a different comparison rule.

• Firewall Migration

This scenario compares the performances of different firewalls from the same vendor.

• Firmware Upgrade

This scenario compares the performances of the same file with different firmware versions.

• Configuration Change

This scenario compares the performances of the same firewall with different enabled features.

• Traffic Profile Change

This scenario compares the performances of the same firewall with different traffic profiles.

• Vendor Comparison

This scenario compares the performances of firewalls from different vendors.

Click an analysis scenario and select the first firewall test result for the comparison. To begin with, choose a firewall from the drop-down list and then choose a performance test result that is associated to the firewall. Then click NEXT.

After selecting the first firewall test result, click the + button to add additional firewall results. The available firewall test results depend on the scenario you have selected and the first firewall test result. For example, if you choose Firewall Migration scenario, which compares the performances of different firewalls from the same vendor, and then select a test result of a vendor A firewall. You won’t see vendor B firewall test results when you add an additional firewall test result for comparison.

Choose an additional firewall from the drop-down list and then choose a performance test result that is associated to the firewall. Then click ADD.

To see the comparison chart on the UI, click VIEW COMPARISON CHARTS button.

To download the analysis report, click DOWNLOAD ANALYSIS REPORT button.